We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Xilinx Delivers Virtex-5 LXT FPGAs with Industry's First Built-In PCI Express Block and Low-Power Serial I/Os

World's First 65-nm FPGAs with Hardened Protocol Blocks and Easy-to-Use Solutions Take Serial Connectivity Mainstream

SAN JOSE, Calif.
Oct 16, 2006

Xilinx, Inc. (NASDAQ: XLNX), the world's leading supplier of programmable solutions, today announced initial shipments of its Virtex™-5 LXT field programmable gate arrays (FPGAs). The second of four domain-optimized platforms in the new Virtex-5 family, the LXT platform series is the first FPGA to deliver a hard- coded PCI Express® Endpoint and Tri-mode Ethernet Media Access Controller (MAC) blocks. The Virtex-5 LXT platform also features the industry's lowest power 65-nanometer (nm) transceiver, typically consuming less than 100mW per channel at 3.2 Gbps.

  (Photo:  http://www.newscom.com/cgi-bin/prnh/20061016/SFM040
           http://www.newscom.com/cgi-bin/prnh/20020822/XLNXLOGO )

Xilinx has engaged with several customers in its early access program since June of this year. "Agilent's high-end instruments are built for emerging markets and require a SoC platform with high-bandwidth connectivity and the time-to-market advantages of FPGAs," said Mr. M. Heinen, R&D section manager at Agilent, one of a select number of early access customers. "The Xilinx Virtex-5 LXT platform provides us with the system performance we need, along with low-power and high-speed interfacing enabled by the 3.2 Gbps transceivers. Pin compatibility across multiple platforms allows us to scale up our design for future needs."

Triple Play Drives Mainstream Adoption

The Virtex-5 LXT platform addresses the challenging bandwidth, power and cost targets facing equipment vendors working to enable the emerging 'triple play' services market (voice, video and data over single broadband Internet Protocol connection). The new platform is optimized to enable FPGA designers across a wide range of applications to benefit from serial connectivity by delivering a comprehensive, fully compliant protocol solution with the greatest ease of use.

"What started in the communication segment to improve bandwidth, cost and scalability is now becoming an industry-wide migration from parallel to serial interfaces across many applications within wired/wireless, video, storage, servers and consumer. A one-size-fits-all FPGA approach is no longer sufficient," said Steve Douglass, vice president of Product Development at Xilinx. "The Virtex-5 LXT platform is the first of several high-speed serial platforms to be offered in the Virtex-5 family. The LXT platform is aimed at the large number of serial connectivity applications ranging from 100 Mbps to 3.2 Gbps."

Industry Analysts Agree

In the multi-standard serial interface market, PCI Express and Gigabit Ethernet have emerged as the leading interface standards in markets served by FPGAs and are expected to account for over 80 percent of all port shipments in 2009.(1)

"The industry is clearly adopting high-speed serial technology as the preferred connectivity solution. Serial provides better bandwidth, cost, power and scalability than alternative parallel interfaces," said Steve Berry, principal analyst at Electronic Trend Publications. "Xilinx has established itself as the industry's premier supplier of high-speed connectivity solutions through several generations of products, and their Virtex-5 LXT platform raises the bar even higher by providing solutions in the sweet spot of the market to a much broader community of designers."

Virtex-5 LXT Platform

The Virtex-5 LXT platform delivers the industry's first FPGA to offer a built-in PCI Express Endpoint block and tri-mode Ethernet MAC, which gives designers an off-the-shelf solution that saves time, reduces power consumption and frees up valuable FPGA fabric resources. Built on the 65-nm Virtex-5 platform with new ultra-fast ExpressFabric™ technology, proven ASMBL™ architecture and low-power triple-oxide technology, the Virtex-5 LXT platform delivers an average of 30 percent higher performance, 65 percent increased capacity and up to 35 percent reduction in dynamic power consumption over previous generation 90-nm FPGAs. The hardened PCI Express core saves users up to 10,000 LUTs and two watts of power as compared to soft intellectual property (IP) core implementations.

  Key features and innovations of the Virtex-5 LXT family include:

  * Industry's lowest power transceivers: up to 24 RocketIO™ transceivers
    operating from 100 Mbps to 3.2 Gbps typically consuming less than 100mW
    per transceiver/receiver pair.
  * Built-in PCI Express block:  fully compliant endpoint block that works
    with the RocketIO GTP transceivers to provide x1, x2, x4 and x8 PCI
    Express interfaces.
  * Built-in tri-mode Ethernet MAC blocks: four independent 10/100/1000 Mbps
    blocks that work seamlessly with RocketIO transceivers.
  * Industry's best signal integrity: eight programmable levels of Transmit
    Pre-emphasis and four programmable levels of Receive Equalization
    address even the most stringent channels. Advanced diagnostic capability
    with the Chipscope™ Pro software toolset gives engineers the best
    signal integrity solution available.
  * Widest protocol support: the Virtex-5 RocketIO transceivers support a
    myriad of industry standards including PCI Express, Gigabit Ethernet,
    XAUI, SONET/SDH, CPRI and OBSAI, Serial RapidIO, HD-SDI and Fibre
  * Off-the-shelf design solution: complete protocol-based solution
    consisting of software, IP cores, reference designs, development kits,
    characterization reports, protocol compliance certification, collateral
    and design support.

  Pricing and Availability

Design software support for the Virtex-5 LXT platform is available this month. Virtex-5 LXT engineering samples are shipping now through the Xilinx Early Access Program in LX30T, LX50T, and LX110T densities, with LX85T and LX330T to follow over the next six months.

At volume production timeframes in 2008, the LX30T device will list for US$109, the LX50T for US$189 and the LX110T at US$529 in 1,000 unit volumes. These price points represent savings of more than 50 percent over competitive offerings for 90-nm FPGAs. For even further cost reductions, the Virtex-5 EasyPath™ program offers a 30 to 80 percent cost reduction and will be available at time of volume production. Xilinx will roll out complete, ready- to-go protocol solutions kits starting with the PCIe™ solutions kit in November 2006.

About Xilinx

Xilinx is the worldwide leader in complete programmable logic solutions. For more information, visit www.xilinx.com.


(1) Electronic Trend Publications (Sep '05)

First Call Analyst:
FCMN Contact: tamara.snowden@xilinx.com

Photo: http://www.newscom.com/cgi-bin/prnh/20061016/SFM040
AP Archive: http://photoarchive.ap.org/
PRN Photo Desk, photodesk@prnewswire.com

SOURCE: Xilinx, Inc.

CONTACT: Tamara Snowden of Xilinx North America, +1-408-879-6146, or

Web site: http://www.xilinx.com/

Worldwide Media Contacts

Silvia E. Gianelli
Phone: 408-626-4328
Email: silvia.gianelli@xilinx.com


image 2